top of page
Club Car IQ Drive High Speed Magnet for GE motor
  • Club Car IQ Drive High Speed Magnet for GE motor


    There are different motors that take different parts and this doesn't work on Excel drive systems! (Excel systems started around 2008 in small numbers and all carts 2014 and new.  This caan be determined by your serial number)  The biggest difference in online sellers is service.  Most sellers sell products with no service or support. I spend the time to help the customer after the sale, to make sure you get the most of what you pay for and I don't ship via Donkey Train to save a buck like so many others do.  If your cart is doing a top speed of 10 mph or less, then you have an issue that replacing the magnet it not likely to fix (unless your factory magnet has come apart)


    This is for a brand new magnet for increased speed on Club Car IQ 48V drive systems with GE motor.  (Does not fit AMD motors...see the last picture for a visual diagram to verify your model) This magnet will remove the regen braking feature and increase the top speed on your cart.  Top speeds vary based on cart and options.  The lifted carts with larger tires will achieve and extra 1-3 MPH over stock tire sized carts.  This is because the larger tire slightly alters the rotational mass and speeds similar to the way that a performance ring gear set would.  I install these magnets on numerous carts annually, and since using these magnets I haven'tpaid another dime to Club Car to release Speed Setting 4 via the computer.  This magnet will give you the full potential to get the best speed from your cart in the most economical way!  The following is a very basic explanation of how they work;


    The magnet mounted inside the speed sensor pictured above measures rotations.  The stock magnet has 8 poles.  The aftermarket magnet only has 4 poles.  Having half the poles makes the electronics see half the rotations.  For every rotation the computer reads 1/2 a rotation.  This unlocks the true speed potential on your cart.  Theoretically, the speed you could achieve would far surpass the mechanical ability of the cart, but it would close to 40 MPH. (This is a theoretical mathematical calculation, and while there are some carts out there that will run that fast, it costs a great deal more than the few bucks these magnets cost to achieve it)


    I've sold hundreds here as well as on eBay, Amazon and online forums.  I support my customers! Don't get taken by a seller who is selling epoxied magnets, and don't wait 3 weeks for a questionable quality magnet from China.....neither of which provide any support for you when you install it!  I will include a detailed sheet with instructions and COLOR pictures showing exact locations of the items and sizes of sockets/wrenches needed to do the job AND written in common mans English.  If needed I can provide technical assistance via email, and my email address will be included with your magnet.  I give free standard shipping via USPS First Class Mail, and will do expedited if needed. (USPS Priority Mail 1-3 day, or USPS Express next day for expedited packages)  This item is not a "speed chip" or "speed jumper harness" type of item.  The "speed chip" doesn't really exist for these!  There are some expensive electronic devices that modify programming and become "locked" to the cart they are on, (to the tune of $150 or more) and there are some "high speed" harnesses for some others. (A high speed harness is just a jumper plug)  High speed wire jumper harnesses have very little effect overall, maxing out at a factory set 17.9 MPH.  I almost never have any issues with my magnets, however in the rare event that something goes wrong with yours (like a defect from the manufacturer) I will replace it immediately.  You can't get service this good anywhere else, especially not from those who ship via Donkey Train to save a dollar and make you wait 4 or more extra days over normal ship time to receive them!  If you have any questions, please email and ask.  Thanks!


    DOES NOT WORK ON EXCEL CARTS!  If your cart's serial number has PD, PH, PU, JE or PJ as the first two digits then this isn't for you! (There are other Excel system prefixes!  If you are unsure, please email me first!!!)  All carts made after 2013 use newer Excel drive systems.  The magnet would fit, but it wouldn't do anything other than slow you down due to a change in the way the computer uses that information on those models as it goes into limp mode. (At this time there is no cheap quick speed fix for the Excel model carts) NOT for AMD motors. AMD motors have a different style magnet that I also have available in another listing!  Your serial prefix MUST have a Q in the second position....for example, PQ11xxxxxx.  The "Q" designates the IQ drive system.


    A recently received testimonial from a customer......."Thanks so much for the easy to read and follow instructions and pictures.  I was worried about being able to do this myself, however using the pictures and doing exactly what you wrote I was finished in 20 minutes and enjoying my faster cart.  Thanks for writing the instructions in simple terms anyone could understand, and not some technical hubub that reads like a theoretical physics textbook from MIT."


    Now for the "legalese" we have to include these days.


    It is the buyer's responsibility to know and follow all laws and statutes for their area of residence.  That means you should review, understand and follow all Federal, State and local laws, statutes and ordinances regarding golf carts and their performance. We live in an absurdly litigious society these days where no one wants to be responsible for their own actions and the consequences thereof.  As such we must include the following:  Many vehicles are used for a variety of tasks beyond the original intended use of the vehicle; therefore, it is impossible to anticipate and warn against every possible combination of circumstances that may occur. No warnings can take the place of good common sense and prudent driving practices and good common sense and prudent driving practices do more to prevent accidents and injury than all of the warnings and instructions combined.

      bottom of page